Forum

Notifications
Clear all

⚠️ 🚨 Hi H-educaters! Moderators will delete all posts with BAD ENGLISH OR GRAMMAR.🚨 ⚠️

Invalid Emails Cleaning Issues

Habibmafzal
(@habibmafzal)
New Member

Dear Hassan,
I have a list of 1,000 emails which needs to be validated. So I came across your tool Email Validator 4.3. I uploaded the list and my port 25 was open and I checked DNS MX level fast, and Thread count was 5 by default so didn't change it. I started the validation process and it cleaned my sheet. I saved the sheet and removed all the Invalid emails, resulting in only Valid mails list.
After completing the whole process I again tried to pass the already validated list through the tool again to confirm that the Bounce rate should be 0. But it again showed invalid emails and I again had to delete them, I tried this cycle 8 times and still the list got smaller and invalid emails kept showing up... How is it possible? am I doing something wrong here? It should clean in one go. Kindly support!

Regards,
Habib

Quote
Topic starter Posted : 11/11/2020 7:13 pm
Hasan AboulHasan
(@admin)
Illustrious Member

Hi friend, I think you didnt watch the tutorial before using the tool. please refer to the full guide here:

https://h-educate.com/super-email-validator-guide/

and this the video tutorial, I explained everything in detail, please watch then ask your questions if you still have

 

ReplyQuote
Posted : 12/11/2020 7:54 am
Habibmafzal
(@habibmafzal)
New Member

Dear Hassan,
Thanks for the prompt reply. the guide you suggested was very useful I was lacking the VPS and went through your video on how to make a VPS on AWS. Now I was also able to install the email validator tool and launched it on VPS. However, my port 25 was not opened, Online Engine and DNS MX (checked) both were not available as well. I went through the guide again and it said to use the tool available on the website, but it has a limit of 200 emails (20 per process).
How can I run the tool on my VPS by opening the 25 port. I tried to google it by going into the firewall settings and creating a new rule in inbound and outbound. Also my port 25 is open when I check on cmd "netsh firewall show status" it shows that my port 25 is open but the tool is somehow not detecting it. Can you please help me out here!
Thanks once again!
Regards,
Habib

ReplyQuote
Topic starter Posted : 12/11/2020 8:10 pm
Hasan AboulHasan
(@admin)
Illustrious Member

Hi friend, on AWS you must contact support to open port 25. its blocked from there side.

ReplyQuote
Posted : 13/11/2020 1:44 pm
rajesh kumar
(@rajesh-kumar)
New Member

Hi hassan,

as mr habibmafzal said, i am not able to take perfect validated email list. simply i will explain my problem.

i have windows vps server with smtp server and my smtp sending rank is 9.5/10

i have installed super email validator and software showing port 25 is opened

1 st day i have validated 250 emails, i got around 130 validated emails

after 3 days again i have tested that 130 emails then i got only around 80. i did not understand that can i forward with first email list or not i am confused i hope you help me in this.

 

thank you

 

ReplyQuote
Posted : 19/01/2021 4:04 pm
Hasan AboulHasan
(@admin)
Illustrious Member

Hi Friend, I explained this issue in the guide.

when the app show invalid, it doesn't mean the email is invalid, sometimes it's because of your server reputation, or maybe the target server blacklisted you, or other reasons.

 

ReplyQuote
Posted : 27/01/2021 10:15 am

Share: