PowerMTA web console monitor can’t be accessed!

Home Forums Email Marketing General Support – Open PowerMTA web console monitor can’t be accessed!

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #622

    I finished Setting up PowerMTA Smtp server and I configure IP rotation and everything, following this course:
    Setup & Configure PowerMTA Server + IP Rotation

    and I got 10/10 as a sending score and everything is awesome, but I have a small problem, that PowerMta Web console is not opening and cant be accessed?
    any solution??

    #623

    This mainly can be caused by two things:

    1- PowerMta web monitor service problem: try restarting the powermta web monitor service using the following command:

    service pmtahttp restart

    2- Firewall problem: the web monitor port that you set in the config file usually (1983) is blocked by the firewall, so try turning off the firewall completely or add a rule to allow the port.

    Command to add a firewall rule:

    firewall-cmd --zone=public --add-port=1983/tcp --permanent
    firewall-cmd --reload

    *Note: if you changed the default port number change it in the firewall command

    Then restart the pmtahttpservice again.

    Good Luck

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.